macOS Agent

Install the NetRecon agent on macOS endpoints for continuous monitoring and inventory reporting.

Prerequisites

• macOS 12 (Monterey) or later
• Administrator privileges (for installation)
• Network connectivity to the probe (direct or via Cloudflare Tunnel)
• An enrollment token from the probe dashboard

Manual Installation

Step 1: Download the PKG

Download netrecon-agent-macos-universal.pkg from the probe dashboard:

1. Log into the probe dashboard
2. Navigate to Agents > Downloads
3. Click macOS (PKG)

The package is a universal binary supporting both Intel (x86_64) and Apple Silicon (arm64).

Step 2: Run the Installer

1. Double-click the downloaded PKG file
2. Follow the installation wizard
3. When prompted, enter:
   • Server URL: your probe's URL
   • Enrollment Token: paste the token from the probe dashboard
4. Enter your macOS admin password when prompted
5. Click Install and wait for completion

The agent installs to /Library/NetRecon/Agent/ and registers as a launchd service.

Step 3: Verify Installation

Open Terminal:

sudo launchctl list | grep netrecon

You should see com.netrecon.agent in the output. Check enrollment in the probe dashboard under Agents.

Command-Line Installation

For scripted installation:

sudo installer -pkg netrecon-agent-macos-universal.pkg -target /

# Configure the agent
sudo /Library/NetRecon/Agent/netrecon-agent configure \
  --server-url "https://probe.netreconapp.com" \
  --enrollment-token "your-token-here"

# Start the agent
sudo launchctl load /Library/LaunchDaemons/com.netrecon.agent.plist

Jamf Deployment

Deploy the agent at scale using Jamf Pro.

Step 1: Upload the Package

1. Log into Jamf Pro
2. Navigate to Settings > Computer Management > Packages
3. Click New
4. Upload netrecon-agent-macos-universal.pkg
5. Save the package

Step 2: Create a Policy

1. Navigate to Computers > Policies
2. Click New
3. Configure the policy:
   • General: Name it "NetRecon Agent Deployment"
   • Packages: Add the NetRecon agent PKG, set to Install
   • Scripts: Add a post-install script (see below)
   • Scope: Target your desired computer groups
   • Trigger: Set to Enrollment Complete and/or Recurring Check-in

Post-Install Script

#!/bin/bash
/Library/NetRecon/Agent/netrecon-agent configure \
  --server-url "https://probe.netreconapp.com" \
  --enrollment-token "your-fleet-token"

launchctl load /Library/LaunchDaemons/com.netrecon.agent.plist

Step 3: Deploy

1. Save the policy
2. Monitor deployment in Computers > Policy Logs

MDM Deployment

Deploy via any MDM solution that supports PKG distribution.

Configuration Profile

Create a configuration profile to pre-configure the agent:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN"
  "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
  <key>PayloadContent</key>
  <array>
    <dict>
      <key>PayloadType</key>
      <string>com.netrecon.agent</string>
      <key>ServerURL</key>
      <string>https://probe.netreconapp.com</string>
      <key>EnrollmentToken</key>
      <string>your-fleet-token</string>
      <key>HeartbeatInterval</key>
      <integer>30</integer>
      <key>ReportInterval</key>
      <integer>900</integer>
    </dict>
  </array>
  <key>PayloadDisplayName</key>
  <string>NetRecon Agent Configuration</string>
  <key>PayloadIdentifier</key>
  <string>com.netrecon.agent.config</string>
  <key>PayloadType</key>
  <string>Configuration</string>
  <key>PayloadVersion</key>
  <integer>1</integer>
</dict>
</plist>

Deploy this profile alongside the PKG package through your MDM.

macOS Permissions

The agent may require the following macOS permissions:

Permission	Purpose	How to Grant
Full Disk Access	Read installed software list	System Settings > Privacy & Security
Network Access	Send data to probe	Granted automatically

For MDM-managed deployments, grant Full Disk Access via a PPPC (Privacy Preferences Policy Control) profile:

<key>Services</key>
<dict>
  <key>SystemPolicyAllFiles</key>
  <array>
    <dict>
      <key>Identifier</key>
      <string>com.netrecon.agent</string>
      <key>IdentifierType</key>
      <string>bundleID</string>
      <key>Allowed</key>
      <true/>
    </dict>
  </array>
</dict>

Agent Management

Configuration File

/Library/NetRecon/Agent/config.yaml

server_url: "https://probe.netreconapp.com"
heartbeat_interval: 30
report_interval: 900
log_level: "info"
log_file: "/Library/NetRecon/Agent/logs/agent.log"

Service Commands

# Stop the agent
sudo launchctl unload /Library/LaunchDaemons/com.netrecon.agent.plist

# Start the agent
sudo launchctl load /Library/LaunchDaemons/com.netrecon.agent.plist

# Check status
sudo launchctl list | grep netrecon

Uninstallation

# Stop the service
sudo launchctl unload /Library/LaunchDaemons/com.netrecon.agent.plist

# Remove files
sudo rm -rf /Library/NetRecon/Agent/
sudo rm /Library/LaunchDaemons/com.netrecon.agent.plist

# Remove receipts
sudo pkgutil --forget com.netrecon.agent

Troubleshooting

Agent not starting after install

• Check system log: log show --predicate 'subsystem == "com.netrecon.agent"' --last 5m
• Verify the plist exists: ls -la /Library/LaunchDaemons/com.netrecon.agent.plist
• Check file permissions on the agent binary

Permission denied errors in log

• Grant Full Disk Access as described above
• For MDM, deploy the PPPC profile before installing the agent

Agent not connecting to probe

• Verify the server URL: curl -I https://probe.netreconapp.com/api/health
• Check if macOS firewall is blocking outbound connections
• Verify the enrollment token is valid

FAQ

Q: Does the agent support Apple Silicon natively? A: Yes. The PKG is a universal binary that runs natively on both Intel and Apple Silicon Macs.

Q: Does the agent work on macOS virtual machines? A: Yes, the agent works in VMware Fusion, Parallels, and UTM virtual machines.

Q: Will macOS Gatekeeper block the installation? A: The PKG is signed and notarized by Apple. If installing manually and Gatekeeper blocks it, right-click the PKG and select Open to bypass the warning.

For additional help, contact support@netreconapp.com.